FB EK ute and van owners.

[oz_ek]

Gents,
I need a measurement for the lower bulkhead panel, measurement needs to be take at the area show in the pic.
any help much appreciated.

ute 002.jpg (214.35 KiB) Viewed 902 times

[oz_ek]

My ute is missing this panel and has an opening of 300mm, I'm thinking whoever removed the panel trimmed a bit extra?

[Brett027]

My one is 285mm but the mid join is modified a fair bit so maybe not the best one to measure. Why not talk to the fellow who just made one?

[ziggy]

I can get you the measurement when I get home this afternoon.

[oz_ek]

My one is 285mm but the mid join is modified a fair bit so maybe not the best one to measure. Why not talk to the fellow who just made one?

He made the first panel for a ute with aftermarket floor pans and is finding some variation in the size / depth of the panel required in relation to the pans.... Mine for example has been trimmed back to 300mm and yours is at 285mm.

[oz_ek]

I can get you the measurement when I get home this afternoon.

Thanks!

[Wrongway Roger]

Just measure my ute and I have 285 mm floor to the crease and 320 mm floor to the fold line.
Hope this helps.
Cheers,
Roger

[Brett027]

Yes of course, different floor pan height will come up here where peeps like me have banged in a new one. Need an original floor I think

[Wrongway Roger]

Unless you are doing an original restoration, the back panel is usually cover in carpet or vinyl.
A new panel with a number of ribs to strengthen rolled in would be the go. IMHO
Cheers,
Roger

[Brett027]

Yes, I'm currently thinking carpet on the lower and vinyl on the upper with a trim piece to cover the join. However, it might end up something different altogether

[Errol62]

Measured my original floor pan to seam 290mm. When I say seam it is actually the rear deck height, being the panel van but ute deck is the same.

Sent from my SM-G781B using Tapatalk

[ziggy]

I measure just shy of 295

Sent from my SM-G988B using Tapatalk

[oz_ek]

I measure just shy of 295

Sent from my SM-G988B using Tapatalk

Original floor pans?

[ziggy]

Yes, all original. Just blast and paint

Sent from my SM-G988B using Tapatalk

[oz_ek]

Yes, all original. Just blast and paint.

Cheers!