Gimme 5 years

[FJWALLY]

Coopers is one of the good ones - my mates family farm grows all of their Hopps down here in Vic.
I slipped into a couple double black JW's last night - neat of course.

Htfu

Sent from my SM-G973F using Tapatalk

[62ekute]

Nothing should interfere with BEER O'CLOCK OH good job don't work to hard there is always another BEER O'CLOCK tomorrow

yeah, you have to get the balance right

jd.JPG (64.15 KiB) Viewed 602 times

Patrick

[Errol62]

Can’t be that cold Blacky you’re not wearing any socks with your surferjoes.


FB ute fixer upper, EK van on rotisserie

[Errol62]

Coopers is one of the good ones - my mates family farm grows all of their Hopps down here in Vic.
I slipped into a couple double black JW's last night - neat of course.

Htfu

Sent from my SM-G973F using Tapatalk

I’m going to have to have a chat to dr Tim about sourcing Mexican product by jimminy.


FB ute fixer upper, EK van on rotisserie

[62ekute]

okay, if beer o'clock is over - I'll get back on track

I plan to change the ute back to column shift so have been collecting bits.

The pin holes in the honeypot are completely worn out (and you can see thread marks in there so it's previously run with a nut and bolt)

honeypot 1.jpg (83 KiB) Viewed 588 times

Thought about ways to fix it for a while - then this NOS one turned up for $35

honeypot 2.jpg (1.77 MiB) Viewed 588 times

honeypot 3.jpg (1.78 MiB) Viewed 588 times

anyway that's something for 'later on'


Patrick

[Blacky]

Can’t be that cold Blacky you’re not wearing any socks with your surferjoes.


FB ute fixer upper, EK van on rotisserie

It’s cold enough that I wish I had bought my “thuggs”


Sent from my iPhone using Tapatalk

[62ekute]

The bonnet on the ute was pretty rough

bonnet.jpg (106.26 KiB) Viewed 550 times

But it came with a solid spare bonnet

bonnet 1.jpg (31.3 KiB) Viewed 550 times

Just needed a quick coat of paint...and, with a bit of polish, the chrome is good enough for my purposes...although I did put on a better bonnet bird.

bonnet 2.jpg (56.15 KiB) Viewed 550 times

[62ekute]

Remember when these were a dime a dozen?

headrest 1.jpg (73.74 KiB) Viewed 532 times

headrest 2.jpg (86.14 KiB) Viewed 532 times

[Errol62]

Remember it like it was 1972. Mate had an early HQ, mph speedo and no headrests. Just don’t get rear ended.


FB ute fixer upper, EK van on rotisserie

[62ekute]

Only a couple of hours of warmth today, so I hung some bits and pieces (battery hold down, gear linkages etc) from the clothes line and sprayed them black.

While they were drying, I put a cigarette lighter in ... that actually took a bit longer than I thought it would - removed the glovebox, airflow control lever and ashtray. Drilled, mounted and wired it up and then there's just enough depth back there to squeeze the lot back in (if you like puzzles). Then put the airflow control lever and glovebox back in and it's bourbon o'clock.

lighter.jpg (75.5 KiB) Viewed 495 times

[BILLY BLACKARROW]

Must be getting cold gone from Beer O'clock to Bourbon O'clock Great work all the same
Yes I do think I have a problem but what a problem to have

[Errol62]

Ha hah you guys problem what problem don’t affect me hic...

Welcome to the fun of fiddling behind the dash of an FB EK Patrick.


FB ute fixer upper, EK van on rotisserie

[62ekute]

another delivery...got some seatbelt mounting plates

seatbelt mounts.jpg (90.55 KiB) Viewed 455 times

a bit stronger than the top mounts I pulled out

seatbelt top mount.jpg (41.72 KiB) Viewed 455 times

the ute previously only had two seatbelts - if anyone has a centre lap belt from back then that looks anything like this I'd be interested

seatbelt.jpg (72.74 KiB) Viewed 455 times

[Errol62]

Ok that’s another rummage I’m due


FB ute fixer upper, EK van on rotisserie

[Errol62]

Couldn’t find it. I know I had one at least like that with the round hole. May turn up yet.


FB ute fixer upper, EK van on rotisserie