Getting very, very close to rego for Grace's ute.
Went to trim up the firewall over Easter, and fitted the "horsehair" to the cabin side of the firewall. The horsehair is a blanket of brown, fibrous insulation, about 1" thick, with a heavy brown cardboard backing. They are held in place with large black plastic plugs. I always thought the horsehairs were one-piece, but it looks like they are two piece. I have fitted the "big one" on the passenger's side, which runs from the passenger kick panel, past the heater hose grommet, over the centreline of the car and almost up to the pedals. The passenger side horsehair has three plastic plugs. It looks like there is also a drivers side horsehair, which is much smaller (drivers kick panel to the pedal assembly, one plastic plug).
Does anyone have a spare drivers side horsehair please? Happy to pay, and pay postage.
Cheers,
Harv
Firewall "horsehair"
Firewall "horsehair"
327 Chev EK wagon, original EK ute for Number 1 Daughter, an FB sedan meth monster project and a BB/MD grey motored FED.
Re: Firewall "horsehair"
Might have one. I’ll be home from work trip Thursday night and have a look.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
getting my FB ute on the road
EK van on rotisserie
EK van on rotisserie
Re: Firewall "horsehair"
I think new repro ones aren’t that dear at around $100 for a set.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
getting my FB ute on the road
EK van on rotisserie
EK van on rotisserie
Re: Firewall "horsehair"
Hi Harv
I have a spare one.

Average condition, gratis if you want it.
Cheers
Clay
Sent from my iPhone using Tapatalk
I have a spare one.


Average condition, gratis if you want it. Cheers
Clay
Sent from my iPhone using Tapatalk
getting my FB ute on the road
EK van on rotisserie
EK van on rotisserie
Re: Firewall "horsehair"
Thanks Clay - PM sent.
Cheers,
Harv
Cheers,
Harv
327 Chev EK wagon, original EK ute for Number 1 Daughter, an FB sedan meth monster project and a BB/MD grey motored FED.