My second ek

[toey1977]

Well after a few weeks of not much to the body I finally got some epoxy to seal off the steal in the door jam and front window channel now time to fix a bit more rust and few dints along the sill



Sent from my E5823 using Tapatalk

[toey1977]

Well I just sold a front end sub frame off the ute. As I new where another one was in better condition I went and seen the guy and said don't sell it I need it and will come get it shortly. Anyway he goes hey toey I got something that might interest you even more I started thinking here we go $$$$$ I don't have and it will just depress me lol. But he had this out side so I hassled the wife for more coin cause I didn't what it to go before I got a chance







Just hope the guy who set it up new what he was doing the biggest complaint from the wife was now it needs to be engineered lol

Sent from my E5823 using Tapatalk

[Blacky]

nice score ! that will save you a bit of work easy to fit a V8 now

[toey1977]

nice score ! that will save you a bit of work easy to fit a V8 now

I don't know which way I want to go. A six or a eight not yet decided I would love a eight but a nice six would be nice to

Sent from my E5823 using Tapatalk

[fingers]

Good buying mate ....

[Mick Jagger]

8888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888
if i had my time over id have gone an 8 for sure ,noise and torque
red 8s are a bit exxy .Id love one
$2500 or a little bit more pick up a nice damaged statesman .
im building a dirty ej wagon ,i think its the way to go
ls1,sump ,mounts,rack,exhaust ,discs ,electrics,belts ,column ,diff ,tailshaft,odd n ends = 8g + give or take
an earlier 8 ,304 is probably the only option for a sedan ? weight n all
big fat tyres and a lsd
oh red sixes are my favorite,but you cant beat an 8,you cant beat an 8
rover/p76 v8s are a few kgs lighter than a red 6
then theres the 1jz nice big modern six
or a turbo falcon six
those falcon sixes are as tough as nails
i love my 186,and ive personally done 80000m on a 161(flogging it) oh yeah ,long live the red six
yeah go the six ,grey.........

[toey1977]

Hahaha you sound more confused than me, a 8 is tough looks great under the bonnet and just has the whole thing about old cars and tough eights but a 6 takes me back to 18 when I had a highly worked N/a six on my p's sounded that good that most thought it was a eight now I have confused myself again

Sent from my E5823 using Tapatalk

[Harv]

Just hope the guy who set it up new what he was doing the biggest complaint from the wife was now it needs to be engineered lol

It looks very similar to the CRS kit. Take a look in the three holes in each subframe Y where the bracing plates are drilled - there should be crush tubes inside the subframe if he knew what he was doing. Has it got bracing (round rod) welded onto the inside edges of the control arms like the CRS kit? Crossmember looks OK, though no notch for the front steering rack shaft.

If ya gunna engineer it, an eight is just as easy as a six. Red sixes are cool, but agree that an eight is cooler.

Cheers,
Harv

[parisian62]

Great stuff...even your ute has put on a smiley face...spooky!

Well after a few weeks of not much to the body I finally got some epoxy to seal off the steal in the door jam and front window channel now time to fix a bit more rust and few dints along the sill



Sent from my E5823 using Tapatalk

[toey1977]

I have to thank fingers for the steering wheel and I finally lashed out and got what was advertised as a nos horn ring off ebay that is in mint condition so it's making me want to send some stuff off to the chrome platers so if anyone has any suggestions on chrome platers in Victoria let me know








So it looks like i need to get the facer for the gauges re-chromed and being a ek standard Ute I want to get the tail lights surrounds done to now

Sent from my E5823 using Tapatalk

[basic.green]

yep thats how it starts.. once you start ya cant stop.. mine was meant to be seat covers and hub caps

[FJWALLY]

I was thinking of doing the same - was recommended Huntingdale platers from the group on Facebook but have not tried them myself.
Question - is that the original colour of the speedo dial? Don't remember mine being that yellow.

[toey1977]

I was thinking of doing the same - was recommended Huntingdale platers from the group on Facebook but have not tried them myself.
Question - is that the original colour of the speedo dial? Don't remember mine being that yellow.

No originally they are just black the speedo was painted a gold with a green pearl which made a very mustard colour the numbers are a bit more blue that they were originally aswell I am pretty happy with the look of it to me it looks very much of colours from the era but then I was a long way from bring born when these cars were made

Sent from my E5823 using Tapatalk

[toey1977]

Well as most of us do we loose track and venture off on a few different projects and deal with life's twist and turns and even contemplated selling the Ute after a couple of offers but so far I have stuck with it and have managed to cut a big hole in the passenger side lol



Sent from my E5823 using Tapatalk

[toey1977]

One such side tracking project was this little beauty is a great little boat but now selling this to make room for other stuff. Has been other projects but I won't get side tracked from the thread also hahaha

Sent from my E5823 using Tapatalk