My EK project

[EK JAY]

all I can say is its probably a 2 man job Jase have you got some one to help you
need some one to push on the outside of the window while you pull the rope
on the inside and I only use the black shite after ive got the window in
here is the link to the rare spares how to fit screens

http://www.rarespares.net.au/shedtalk/W ... pXbpUb8GO8

[Mick Jagger]

Sweet ,Thanks for that ,ill have to get the rubber to fit first.....
ive taped it on as I go ,man its tight,i think the problem is that the glass doesn't
sit down in the rubber far enough,old was 10mm new is 7mm glass in rubber
due to the little rises where it sits,see pics 1 and 2 old vs new
the old one is old but not squashed,so that's why the rear rubbers don't fit imho
I wonder if I could glue the bastard onto the glass to stop it from springing off when im installing stainless etc...
f#$king cars,lol

[EK JAY]

When I did the screen in the red wagon I tried a few different strips spare ones I had before I got them
To fit good and make sure there got no bent bits in the strip edges where it go's onto the rubber
Just bend it back out with some long nose pliers they get them from people sticking screw drivers under them to
Lever the screen out I've done it my self
And yeah the rubber will come of the glass only about a thousand times so you might need the odd refreshment
Break
Car is looking goooood spats are cool

[WayneXG95]

Surely for a couple of grape juices Sunnytim would drop over and give a man a hand?

[searsy]

Man that's comin up nice mate
Keep
Up the good work

[BILLY BLACKARROW]

cheeres ,will try the hair dryer trick,i thought the hoodlining would be the easiest part.......
Hey darling Searsy,long time no posts,now get back to your renos
thinking about using this for door rubbers in 10x 13mm, because im poor
http://www.fitchtherubberman.com.au/epa ... ducts/P398

How did the rubbers work out after they settled in are you happy with them have you tried the hose test yet, I am not happy with rares one's they wont let the door close properly and I dont want to knock the doors of the hinges
BILLY

[BILLY BLACKARROW]

bump
BILLY

[Mick Jagger]

hey Billy no hose test as yet ,doors were tight to close but 3 wks later a gentle slam
Ive put the front seat in ,fully back its just hitting the gear lever.....
am going to have to move it back 30mm or so
do you think if I drill more holes and weld some nuts on underneath as original would be ok?
painted the dash and made a parcel tray,both covered with clinker grey......



once the seat is moved back itll be about here

[Mick Jagger]

Bill the glass runner was 64-193 ,im happy with the door rubbers
it doesn't rain in queensland...

[BILLY BLACKARROW]

I have tried to find 64-193 on the 2 suppliers you mentioned but with no luck.
Thanks Jas

[Mick Jagger]

Best to give them a ring,
Was just on the phone it's 64-193
There number 07 3865 5600
Cheers

[ben]

Its that a head knob or a knob head

[BILLY BLACKARROW]

Best to give them a ring,
Was just on the phone it's 64-193
There number 07 3865 5600
Cheers

Found it thanks Jas
BILLY

[Mick Jagger]

Ben , it's a little head job
Gear knob:)
It's Ed Roths head
We'll not his real one, I don't think.

[ben]

Ben , it's a little head job

Could be painful Mick, if your play buddy catches Ed Roth out the corner of her eye and gets a fright