BACK ON THE 32

Got something else that you want to show off that's not an FB or EK? Try this section.

Moderators: reidy, Blacky

User avatar
CHOPPED
Posts: 1193
Joined: Mon Feb 20, 2006 12:09 am
State: NOT ENTERED
Location: PERTH WA

Re: BACK ON THE 32

Post by CHOPPED »

so we pushed the 32 out into the full sun this week to get some heat on the body
let it bake in the sun
supprised how many people stop and asked questions about the car :)

Image
HEY IT WASNT ME
Blacky
Posts: 13047
Joined: Tue Jul 20, 2004 8:58 am
State: WA
Location: up in the Perth hills

Re: BACK ON THE 32

Post by Blacky »

coupla rattle cans of flat black and she is good to go :twisted: :twisted: :twisted:
I started with nothing and still have most of it left.


Foundation member #61 of FB/EK Holden club of W.A.
User avatar
CHOPPED
Posts: 1193
Joined: Mon Feb 20, 2006 12:09 am
State: NOT ENTERED
Location: PERTH WA

Re: BACK ON THE 32

Post by CHOPPED »

so after having the 32 outside for the week i noticed that the left hand rear fender was sitting on an angle and much lower than the other side :roll:
boys at work said to leave it no one would notice but it just did my head in the more i looked at it :x

Image
had no choice so decided to cut it off and redo the bottom :roll:
Image
worked out a pie cut to bring it back into shape
Image
then with a bit of tweaking clamped it back together and reglassed the inside
Image
came out alot better so im happy again :thumbsup:
HEY IT WASNT ME
User avatar
CHOPPED
Posts: 1193
Joined: Mon Feb 20, 2006 12:09 am
State: NOT ENTERED
Location: PERTH WA

Re: BACK ON THE 32

Post by CHOPPED »

well the 32 came back to the workshop today
sent it out to get the exhast done dom from pretige exhast did an awsume job in stainless
this is the first time that the car has left my shop during the build

Image

so with th coupe back i got back into finishing some items on the interior
i made up these 6mm solid alloy bar for the door trims
i drilled and tapped threads into the back side
i will polish these out to match all the chrome pieces inside

Image

so i made up a overhead storage section to put things in
not alot of room in the 32
i made it with a concave shape that will tie in with the head lining
doors hinge down on a simple push to open mech

Image

trying to get it done as i want it finished for my 50th in july :roll: :lol:
maybe not :esad:
HEY IT WASNT ME
User avatar
WesternWagon
Posts: 966
Joined: Wed Jul 07, 2010 6:33 pm
State: WA
Location: Mandura WA

Re: BACK ON THE 32

Post by WesternWagon »

Nice work Paul

Will have to come have a look

Gazza
Member : Holden Car Club WA.
:ASRF Member
: Secretary FB/EK holden Club of WA.
User avatar
FireKraka
Posts: 2539
Joined: Fri Jan 24, 2014 11:12 am
State: WA
Location: Serpentine, WA

Re: BACK ON THE 32

Post by FireKraka »

Hi Paul;
Good to see that you have been able to get time to get back into the coupe you have got to stop working 7 days a week mate and get it finished for your 50th it is good to set goals gives you something to drive towards.

Regards
Neil H
Member of WA FB/EK Car Club
Frankenstein EK V6 Ute
The Reverend FB Station Wagon Project
1950's Commer Light Truck (2.5 Ton)
User avatar
CHOPPED
Posts: 1193
Joined: Mon Feb 20, 2006 12:09 am
State: NOT ENTERED
Location: PERTH WA

Re: BACK ON THE 32

Post by CHOPPED »

thanks neil
been 7 day weeks for about 25 years now :roll:
thats just me
everyone knows that :crazy:
will get onto your centre console in the next couple weeks mate
just trying to get a saturday afternoon that jayden is not racing
start of motocross season is a bit mental for us
practice at the track sunday just gone by :roll:
monday afternoon back at the track
tuesday is a night off :clap:
still got to service the bike though
wednesday is training at the veladrome
thursday practive at the track
friday is back on the cycle at the drome
saturday is summercross at coastal club
this will finish at 12pm
sunday is 1st meeting at ajs 5.30 start im scruterneering 160 or so bikes :lol:
i just fcuking love being involved with my sons racing :roll:
paul
HEY IT WASNT ME
User avatar
FireKraka
Posts: 2539
Joined: Fri Jan 24, 2014 11:12 am
State: WA
Location: Serpentine, WA

Re: BACK ON THE 32

Post by FireKraka »

Hi Mate I wasn't pushing I know you are busy sounds like you need to give up your job and become a full time motorcross dad :yeahhh:

Love your coupe and look forward to seeing it again I just about have my ute rolling so I have been busy myself and am about to extend my home workshop another 18 m2 running out of room when it is only 6m x 6m and I have all of my shit in there :helleyes:

Give me a buzz when you get a free day. :whistlinggg:

Regards
Neil H
Member of WA FB/EK Car Club
Frankenstein EK V6 Ute
The Reverend FB Station Wagon Project
1950's Commer Light Truck (2.5 Ton)
User avatar
CHOPPED
Posts: 1193
Joined: Mon Feb 20, 2006 12:09 am
State: NOT ENTERED
Location: PERTH WA

Re: BACK ON THE 32

Post by CHOPPED »

8) :thumbsup:
HEY IT WASNT ME
Doc Bob
Posts: 436
Joined: Sun Feb 20, 2011 12:12 pm
State: WA
Location: The "CHARRED" Hills of Waroona, SouthWest Oz

Re: BACK ON THE 32

Post by Doc Bob »

Looking good Paul, keep up the good work!
Gonna be a nice bit of gear when finished :D
Now working @ https://www.facebook.com/pages/Fiddy-cu ... 82?fref=ts
Vice Pres FB/EK Club West Oz. & Just Cruizin Street Machiners
'36 Chev Pick-up
'40 Chev Coupe Ute
'62 EK Wagon
'63 EH Roadster
'68 F#*d Fairlane
'76 LX SS Hatch
User avatar
CHOPPED
Posts: 1193
Joined: Mon Feb 20, 2006 12:09 am
State: NOT ENTERED
Location: PERTH WA

Re: BACK ON THE 32

Post by CHOPPED »

well i got some more time on the 32 over the easter break
my son (jayden )didnt run the 1st state round due to an injury at the track through the week :(
sort of makes me happy to a certain degree i get a weekend off motocross :clap:
i finished up the bracketry for the alternator and now in the middle of setting up the air condissoner compressor
radiator hoses and the rest of the engine bay
Image
just in the middle of making up the fuel lines from the tank
thought id put up a shot of how we did the ballance pipe on the exhast
this now doubles up as a tailshaft loop
il polish this out when i pull it down
Image
also finished the running board steps
i didnt want to run full rubber as i want to see some colour
il polish these out also and run some sika to fix them down when we are doing final assembly
Image
Image
not long now before i pull it all down and put the chassis on 1 rotissery
and the body of the other
so i can start detailing it and get onto the paint
il post more pics as i progress a little further
paul :)
HEY IT WASNT ME
Blacky
Posts: 13047
Joined: Tue Jul 20, 2004 8:58 am
State: WA
Location: up in the Perth hills

Re: BACK ON THE 32

Post by Blacky »

God stuff mate, nice to see you got a bit of time off over the break :thumbsup: Hope Jayden isn't too bunged up :shock:
You coming to Waroona next week ???
I started with nothing and still have most of it left.


Foundation member #61 of FB/EK Holden club of W.A.
User avatar
CHOPPED
Posts: 1193
Joined: Mon Feb 20, 2006 12:09 am
State: NOT ENTERED
Location: PERTH WA

Re: BACK ON THE 32

Post by CHOPPED »

yes mate im heading down with old jim
ravenswood pub ??? thats on the left isnt it :lol:
HEY IT WASNT ME
Blacky
Posts: 13047
Joined: Tue Jul 20, 2004 8:58 am
State: WA
Location: up in the Perth hills

Re: BACK ON THE 32

Post by Blacky »

Yeah - BEFORE the river apparently :lol: :lol: :lol: :lol:
I started with nothing and still have most of it left.


Foundation member #61 of FB/EK Holden club of W.A.
User avatar
CHOPPED
Posts: 1193
Joined: Mon Feb 20, 2006 12:09 am
State: NOT ENTERED
Location: PERTH WA

Re: BACK ON THE 32

Post by CHOPPED »

:lol: im not leading :roll:
HEY IT WASNT ME
Post Reply