can't sell it so i'll f#%k it LOL

Post photos of your pride and joy, or updates on your rebuild!

Moderators: reidy, Blacky

Mick
Posts: 4158
Joined: Sun Sep 26, 2010 8:47 am
State: NSW
Location: Coffs Harbour NSW

can't sell it so i'll f#%k it LOL

Post by Mick »

FB standard i've had for a while it's a pretty clean car, bit of old accident damage to skirt of subframe doesn't affect anything couple of bolt holes don't line up and a bit of damage on rear right rail (twist in spring hanger) good floors that need a few very small patches
it had been sitting for 20 years in a shed in temora NSW before i got it, i have never seen a car with so many bones in it :shock: the rear seats must have weighed 25 kilos each section then the floors were up to the seats with rat sh!t and more bones
i very seriously considered going mild grey and 3 speed with it but it just worked out to expensive and still don't think i would have been happy with the way it went (me personally) and i have a 149 and aussie 4 speed just laying around so it just made sence to stick that in, i'm just sticking EH drum brakes all round on it with an EH diff and steering collum
so that's about where i am it's on the trailer ready for a trip to sydney tomorrow to get rear rail fixed floor hump done and engine and gearbox mounts done
Image
Image
Image
sometimes yor just better off shitting in yor hands and clapping

W.S.C.C.A
Woodstock chapter
User avatar
Devilrod
Posts: 7394
Joined: Fri Apr 30, 2004 12:55 pm
State: VIC
Location: Beaconsfield, Vic

Re: can't sell it so i'll f#%k it LOL

Post by Devilrod »

So you plan on having a car for ready for Summernats? :mrgreen:
Speed and Style........... One day I'll get the speed bit.
Mick
Posts: 4158
Joined: Sun Sep 26, 2010 8:47 am
State: NSW
Location: Coffs Harbour NSW

Re: can't sell it so i'll f#%k it LOL

Post by Mick »

actualy not going this year :shock: the last of the guys i used to go with stopped going last year still a couple of guys i know there but not the same so decided to can it this year
but i know where yor going with the comment :wink: it shouldn't take long at all as most of the stuff is sitting here waiting to go in/on it, i'm not bothering with paint at the moment just depends how lazy i am :oops: as to how long it takes :lol:
there's a nostalgia drag meet in about 3 weeks might chuck the blower on it and take it to that just as a basic driver not regoed, if i do that (need a huge dose of motivation though :lol: ) i'de like to try and find a black 3.3 runner so i don't damage the 149
sometimes yor just better off shitting in yor hands and clapping

W.S.C.C.A
Woodstock chapter
User avatar
Harv
Posts: 5228
Joined: Mon Oct 08, 2007 2:00 pm
State: NSW
Location: Sydney, Australia

Re: can't sell it so i'll f#%k it LOL

Post by Harv »

there's a nostalgia drag meet in about 3 weeks might chuck the blower on it
Mick, give us a yell if you end up coming down to the Creek that weekend, especially if you bring a blown early.

Cheers,
Harv
327 Chev EK wagon, original EK ute for Number 1 Daughter, an FB sedan meth monster project and a BB/MD grey motored FED.
EK JAY
Posts: 1886
Joined: Sat Mar 17, 2007 8:25 pm
State: NSW
Location: Sawtell

Re: can't sell it so i'll f#%k it LOL

Post by EK JAY »

looks pretty straight mick maybe you could put some shiney color on it :thumbsup:
good on you for saving it from the rats
its a true ratbox then :clap:
EK JAY SINCE 1990
Mick
Posts: 4158
Joined: Sun Sep 26, 2010 8:47 am
State: NSW
Location: Coffs Harbour NSW

Re: can't sell it so i'll f#%k it LOL

Post by Mick »

EK JAY wrote:looks pretty straight mick maybe you could put some shiney color on it :thumbsup:
good on you for saving it from the rats
its a true ratbox then :clap:
at the moment i'm not even planning on painting it at all
and i'm fighting temptation and peer pressure to fit injected 5 litre it's very very close there's a VQ statesman here (where i'm working on it) as a donor, if I could put my hands on a LH/LX/UC front end it might happen
sometimes yor just better off shitting in yor hands and clapping

W.S.C.C.A
Woodstock chapter
User avatar
Devilrod
Posts: 7394
Joined: Fri Apr 30, 2004 12:55 pm
State: VIC
Location: Beaconsfield, Vic

Re: can't sell it so i'll f#%k it LOL

Post by Devilrod »

Go on Mick you know you want too..... :twisted:
Speed and Style........... One day I'll get the speed bit.
EK JAY
Posts: 1886
Joined: Sat Mar 17, 2007 8:25 pm
State: NSW
Location: Sawtell

Re: can't sell it so i'll f#%k it LOL

Post by EK JAY »

8) Yeah you might even like it enough to keep it :thumbsup:

well for a little while anyway :P :lol:

:smile2: seriously though would be a good sleeper has the look body wise 8)
EK JAY SINCE 1990
Mick
Posts: 4158
Joined: Sun Sep 26, 2010 8:47 am
State: NSW
Location: Coffs Harbour NSW

Re: can't sell it so i'll f#%k it LOL

Post by Mick »

EK JAY wrote:8) Yeah you might even like it enough to keep it :thumbsup:
you know that is the reason I don't want to do it because I'm f#%king hopless and would sell it as soon as someone made a half reasonable offer :oops: :oops: :oops: that's actually why I was trying to sell it before I even started on the red 6 cylinder conversion I bought it with good intentions then started thinking why bother you'll only sell it once finished :roll: :oops: i'm retarded :lol:
sometimes yor just better off shitting in yor hands and clapping

W.S.C.C.A
Woodstock chapter
STANLEY
Posts: 367
Joined: Tue Sep 23, 2008 9:16 am
State: NOT ENTERED
Location: SYDNEY, AUSTRALIA

Re: can't sell it so i'll f#%k it LOL

Post by STANLEY »

Front end is available, you are the only one stopping it from happening.
Grimbo

Re: can't sell it so i'll f#%k it LOL

Post by Grimbo »

Which ever way you go it wont matter. You always turn out something different and cool! :D

It's a shame you couldn't sell it but great for us as we get to see another of your creations.

Cheers
Grimbo
User avatar
Devilrod
Posts: 7394
Joined: Fri Apr 30, 2004 12:55 pm
State: VIC
Location: Beaconsfield, Vic

Re: can't sell it so i'll f#%k it LOL

Post by Devilrod »

STANLEY wrote:Front end is available, you are the only one stopping it from happening.

Bwahahahahahahah! Friends hey! Come on Mick no excuses now... :twisted: :twisted: :mrgreen:
Speed and Style........... One day I'll get the speed bit.
Mick
Posts: 4158
Joined: Sun Sep 26, 2010 8:47 am
State: NSW
Location: Coffs Harbour NSW

Re: can't sell it so i'll f#%k it LOL

Post by Mick »

well I actually called it today said f#%k it ok do it give me a price on fitting the 5 litre but the mate said he's really just to busy to do it so it was gunna happen even though I wasn't fully on board but the fitter canned it :lol: on the plus side hump is pretty much in engine mounts are done and rear gearbox cross member is well on it's way (I have pics but they're on my phone and i'm not at home)
and really I didn't want to 5 litre it I want the Austin done and I've also got on to a V6 EK to look at tomorrow so I can spend the money I would have spent doing the 5 litre conversion on a complete car with a V6 fitted

wish I could send pics to the guy that recond this car wasn't worth $1100 the underneath is near spotless :)
sometimes yor just better off shitting in yor hands and clapping

W.S.C.C.A
Woodstock chapter
Mick
Posts: 4158
Joined: Sun Sep 26, 2010 8:47 am
State: NSW
Location: Coffs Harbour NSW

Re: can't sell it so i'll f#%k it LOL

Post by Mick »

well it's official i've f#%ked :shock: :lol:
Image
Image
Image
Image
Image
Image
Image
Image
Image
sometimes yor just better off shitting in yor hands and clapping

W.S.C.C.A
Woodstock chapter
Mick
Posts: 4158
Joined: Sun Sep 26, 2010 8:47 am
State: NSW
Location: Coffs Harbour NSW

Re: can't sell it so i'll f#%k it LOL

Post by Mick »

SunnyTim wrote:one step closer to being saved rather than $*#@ I'd say Mick
yeah i know, i really would have liked to leave it grey 3 speed but it just wasn't financially viable to me, the f#%king it came from some arse clown on ebay that has been being a pain in the rrrs about me f#%king the car by modifying it he started again this saturday night :roll:
sometimes yor just better off shitting in yor hands and clapping

W.S.C.C.A
Woodstock chapter
Post Reply