New to Forum and WA

[Marko]

Cheers Dave, I will be calling the DOT as it gets closer to the time however any info you have to offer is great. Got any closeups of your engine bay. We are currently going through exhaust, steering, radiator issues. Oh and brakes! It would be great to chat if you have the time. PM number be great. How do you find the weight of the chev up front? Marko

[Doc Bob]

Hi Marko,

my ute is regoed with a 350. the ute had just been regoed in Qld about four months prior. i had all the paperwok and had no drama with the inspection.
the ute was not in my name, i produced a receipt for the ute and it all happened in about three hours... most of that waiting @ Welshpool Inspection Centre.
I was told to go there as if there were any problems they could speak with the appropriate people.

i still have all the required info etc and a contact number @ DOT.
i can pm you my number..

cheers

Dave

Threyago Marko..........Dave is the man to have on your side
Hope all goes well and hope to see it on the road soon.

[Marko]

Cheers Doc, still waiting on some progress pics from mechanic. Apparently everything is on track and I should have the van in WA around July.
Hey what are your thoughts on doing something like what they are doing in VIC with the "back to the drive-in thing." Dongara is where I live and we still have an operating drive-in. Obviously will take some organizing but could be great.
Let me know your thoughts

[Blacky]

Theres plenty of cars in Gero , they have a big show every Sep/Oct so there should be a few starters.

[Doc Bob]

Cheers Doc, still waiting on some progress pics from mechanic. Apparently everything is on track and I should have the van in WA around July.
Hey what are your thoughts on doing something like what they are doing in VIC with the "back to the drive-in thing." Dongara is where I live and we still have an operating drive-in. Obviously will take some organizing but could be great.
Let me know your thoughts

Always a great idea for a run.........unfortunately, not many Drive-in's left on this side of the desert.
Only two I know of are north Perth and Busselton. There's a rumour the one in Perth is under threat to be shut down as well

[Marko]

Dongara has an operating drive-in, very much old school, I haven't organized anything like this before so I will start making some enquiries locally and post as I go. If anyone has any ideas feel free to help out.

[Marko]

Hi Guys, got some progress pics. The plan is to do all the engineering mods, then interior, then paint touch ups then truck to WA where I now live, register and then I can pretty it up. So far thing are still on track and it should be on the road around July and in WA shortley after.

diff going in

P2071824-2.jpg (130.44 KiB) Viewed 2406 times

[Marko]

A couple of pics from the workshop

The Van

Van in workshop (600x450) (500x375).jpg (143.96 KiB) Viewed 2361 times

2 speed VN wiper motor

2 speed wiper motor (500x375).jpg (166.27 KiB) Viewed 2361 times

Booster hidden under rear floor

master cyl (500x375).jpg (164.49 KiB) Viewed 2361 times

upright wall removed for access to battery and booster

access to brake booster and battery (500x375).jpg (147.63 KiB) Viewed 2361 times

Rodeo seat should look pretty good once recovered

seat from passengers door (375x500).jpg (141.92 KiB) Viewed 2361 times

This might upset some one - making room for an off the shelf VOLVO radiator and cooler

working out radiator options (500x375).jpg (165.29 KiB) Viewed 2361 times

LH rack, HR front and waiting on Alien Retro Column

LH front rack (500x375).jpg (152.22 KiB) Viewed 2361 times

Getting closer,

[MeFB]

decided to become a monk and had to donate (give away) all of his belongings and moved overseas to follow his dream.

Sounds like me after the divorce

[Marko]

FINALLY on my way over to Cairns to get my Van, Flying out Friday Night.

Road test, register and truck over after Easter.

The Engineering side is done, now I get to finish off a few custom mods and make it all shinny and pretty.

elect7.jpg (55.08 KiB) Viewed 2054 times

elect9.jpg (46.26 KiB) Viewed 2054 times

IMG_5539.jpg (21.46 KiB) Viewed 2054 times

IMG_0602.jpg (28.05 KiB) Viewed 2054 times

IMG_4336.jpg (17.57 KiB) Viewed 2054 times

PA2230641.jpg (101.86 KiB) Viewed 2054 times

[Marko]

So excited, I forgot to mention I will have a fully polished original steering box and 4 x deep dish 13" chromies for sale once I pick the car up if anyone is interested. The steering box was good when pulled out last year and the wheels were good, now a little rusty (the ones on my avatar pic). Can post pics when I get to Cairns.

[vintageholden]

Hi Guys, got some progress pics. The plan is to do all the engineering mods, then interior, then paint touch ups then truck to WA where I now live, register and then I can pretty it up. So far thing are still on track and it should be on the road around July and in WA shortley after.

P2071824-2.jpg

is that the 10 bolt you got from me....

[Marko]

Nope, the housing, billet axles and centre are all of Queensland origin. I am looking at either cutting it down or selling it when the van gets to WA. I really want to fit deep dish rims on the rear, this 10 bolt only gives me 95mm drum face to guard. Perfect for minimal dish but not what I want.

[vintageholden]

ok..i sold a shortened one a month ago

[Marko]

Hi Vintage,

Any ideas on the width of the one you sold, was it drum or disk brake.

What sort of dish did it allow you to have, deep or shallow