Tony's FB Ute

Post photos of your pride and joy, or updates on your rebuild!

Moderators: reidy, Blacky

User avatar
YelloYoot
Posts: 54
Joined: Thu Jun 07, 2012 10:54 pm
State: NOT ENTERED
Location: Busselton WA

Re: Tony's FB Ute

Post by YelloYoot »

Installed a Pertronix Ignitor in the old girl today. It was a good excuse to buy myself a Dremel multiwhizzer :wink: Had a few issues getting the dizzy to mesh back in the right tooth but got it in the end. Also fitted the Flamethrower coil i had laying around (painted yellow) and some sexy yellow plug leads. I increased the gap on the plugs to 0.85mm and timed her up. No pinging, even on yucky regular fuel :D

It seems to go a little better, not sure if the timing was optimised pre fitting, but at least its going again, i quite often break things trying to make improvements - the old 'if it ain't broke, don't fix it' thing.

2 of the leads were too short so i've just sent an email, hopefully the bloke sends me the correct ones.

Before
Image

After
Image


I've got a carby synchroniser http://www.ebay.com.au/itm/carby-balanc ... 3378e8c82a on the way from eBay land, so that will be my next tinkering session, try to stop the occasional popping backfire at idle.

Tony
User avatar
michaeljohn1234m
Posts: 185
Joined: Wed May 09, 2012 8:13 pm
State: NSW
Location: AU central coast

Re: Tony's FB Ute

Post by michaeljohn1234m »

a bit of Yellow makes such a big difference I like it heaps
User avatar
YelloYoot
Posts: 54
Joined: Thu Jun 07, 2012 10:54 pm
State: NOT ENTERED
Location: Busselton WA

Re: Tony's FB Ute

Post by YelloYoot »

Thanks, the set of leads I received were for a red motor, new yellow grey set is on it's way now apparently
User avatar
(AUST)Mod
Posts: 2272
Joined: Sun May 07, 2006 11:16 pm
State: WA
Location: Perth

Re: Tony's FB Ute

Post by (AUST)Mod »

Where did you purchase the yellow leads? I would love to grab some for my FB
Craig wrote: Andrew you have a red so I wouldn't race it :wink:

Image
User avatar
YelloYoot
Posts: 54
Joined: Thu Jun 07, 2012 10:54 pm
State: NOT ENTERED
Location: Busselton WA

Re: Tony's FB Ute

Post by YelloYoot »

eBay mate, $31.50 delivered, pretty cheap i reckon.

http://www.ebay.com.au/itm/Holden-Grey- ... 3cc8b0287c

when you purchase just make sure you add in the note to seller section which colour you want, he makes them in red, blue, white, yellow, pink & grey.

Tony.
User avatar
EK-selent
Posts: 20
Joined: Sun Jun 26, 2011 11:58 pm
State: NOT ENTERED
Location: Donnybrook

Re: Tony's FB Ute

Post by EK-selent »

heya thats an amazing collection of photos!! all in WA right?

Great ute you have too. Im in Donnybrook with my 61 EK sedan. might see ya cruzin

:thumbsup:
User avatar
YelloYoot
Posts: 54
Joined: Thu Jun 07, 2012 10:54 pm
State: NOT ENTERED
Location: Busselton WA

Re: Tony's FB Ute

Post by YelloYoot »

Yeah mate, all around the wheatbelt / goldfields areas.

your EK looks very tidy, I'll keep an eye out for you.

I'm in the process of buying a house over in Busso at the moment so will be able to get the ute out cruising more often i reckon, and have a decent shed. i've been keeping the ute in my mum's shed, which makes it that little bit harder to just take it for a spin.
User avatar
YelloYoot
Posts: 54
Joined: Thu Jun 07, 2012 10:54 pm
State: NOT ENTERED
Location: Busselton WA

Re: Tony's FB Ute

Post by YelloYoot »

So we've moved into the new shed, oh, and house :esurprised: about 6 weeks ago, definitely enjoying having a shed, been missing out all these years

The ute looks at home

Image

So I figured i should get my other ute from its hiding spot for the last couple of years to keep the old girl company

Image

The boat got evicted to the patio :ebiggrin:

Image

Luckily I found the missing window trim piece in the back, had blown off during the trailer ride, it originally blew off on the Nullabor but i got a replacement, glad i don't have to find another one.

Tony
vintageholden
Posts: 575
Joined: Fri Sep 07, 2007 5:58 pm
State: NOT ENTERED
Location: W.A carlisle 6101

Re: Tony's FB Ute

Post by vintageholden »

there is a set of tasmans on gumtree/perth if your interested..

http://www.gumtree.com.au/s-ad/maylands ... 1009645905
User avatar
YelloYoot
Posts: 54
Joined: Thu Jun 07, 2012 10:54 pm
State: NOT ENTERED
Location: Busselton WA

Re: Tony's FB Ute

Post by YelloYoot »

Today Mum brought around a DVD she made of the ute during its restoration, she didn't know she had it and stumbled across it the other day, i managed to grab a few photos off it, average quality as they're screenshots from the dvd but a bit of a stroll down memory lane, hope you enjoy them.

Image

Image

Image

Image

Who needs a rotisserie?? I can remember it well, about 6 young lads and a mattress!
Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

The date on the last photo puts it nearly spot on 10 years ago it was ready for rego :smile22:

Cheers,

Tony.
User avatar
MeFB
Posts: 1717
Joined: Wed Oct 26, 2011 2:08 pm
State: NOT ENTERED
Location: WA and Lumut

Re: Tony's FB Ute

Post by MeFB »

Awesome stuff! Your old man did a great job bringing it back from the brink (or slightly over the brink by the looks of it).

Hopefully one day you'll hand it down to another family member who'll treasure it as much as you do :thumbsup:
Alan
Member No.1 of the FB EK Holden Car Club of WA (Woo-hoo :D sweet!)
In the Shed
Posts: 2031
Joined: Wed May 16, 2012 10:18 pm
State: SA
Location: South Australia

Re: Tony's FB Ute

Post by In the Shed »

Hey Tony,
Love your ute, very tidy and wheels set it off. Your Dad had his work cut out for him but the end result looks just spot on. No doubt it will be a keeper?
Regards
Stephen
A day in the shed beats a day at work!
parisian62
Posts: 3996
Joined: Wed May 11, 2005 2:19 pm
State: NSW
Location: Sydney
Contact:

Re: Tony's FB Ute

Post by parisian62 »

Good stuff another one saved :thumbsup: Check out the tailgate in the first pic...
Feelin free in a '61 FB.
Member of FB-EK Holden Car Club Of NSW Inc.
Check out the Rebuild of Old Timer
User avatar
MeFB
Posts: 1717
Joined: Wed Oct 26, 2011 2:08 pm
State: NOT ENTERED
Location: WA and Lumut

Re: Tony's FB Ute

Post by MeFB »

parisian62 wrote:Good stuff another one saved :thumbsup: Check out the tailgate in the first pic...
What tailgate? I just see holes and rust :lol:
Alan
Member No.1 of the FB EK Holden Car Club of WA (Woo-hoo :D sweet!)
User avatar
Harv
Posts: 5329
Joined: Mon Oct 08, 2007 2:00 pm
State: NSW
Location: Sydney, Australia

Re: Tony's FB Ute

Post by Harv »

I just see holes and rust
That's very expensive NASCO tailgate rust. I thought all utes were fitted with it from the factory :lol:

I shouldn't laugh... the lower tailgate on my wagon had more cancer than I thought.

Cheers,
Harv
327 Chev EK wagon, original EK ute for Number 1 Daughter, an FB sedan meth monster project and a BB/MD grey motored FED.
Post Reply