Twin SU Carbys

OldMan's Lacky · Post by **OldMan's Lacky** » Mon Jun 11, 2012 4:40 pm

Would appreciate some advice please:

I have a set of twin SUs. They came with the car but were never used on it. Does anyone know what they are from? They both have number '4468' printed on them. I intend on selling them so thought it best to know what I'm selling first

Cheers

Danny

fingers · Post by **fingers** » Mon Jun 11, 2012 5:57 pm

[quote="OldMan's Lacky"]Would appreciate some advice please:

I have a set of twin SUs. They came with the car but were never used on it. Does anyone know what they are from? They both have number '4468' printed on them. I intend on selling them so thought it best to know what I'm selling first

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
2 inch carbs were fitted to some jaguars, rovers and healeys....... to identify exactly which car ...would need a tag number..........Fingers

OldMan's Lacky · Post by **OldMan's Lacky** » Mon Jun 11, 2012 6:03 pm

Cheers Fingers.

Any easy way of finding that out

?

fingers · Post by **fingers** » Mon Jun 11, 2012 6:18 pm

not that I know of mate .....the same carbs were used on these cars ...and spec,ed up to suit each model and identified by the tag.......could try somebody from the Jag club ...........Fingers

OldMan's Lacky · Post by **OldMan's Lacky** » Mon Jun 11, 2012 6:36 pm

Thanks anyway mate.

wot179 · Post by **wot179** » Mon Jun 11, 2012 6:59 pm

They arent 2 inch SUs,they look like 1 1/2 or 1 1/4s.

They will be off some 4 cylinder pommy shitbox,an MG or the like...

wot179 · Post by **wot179** » Mon Jun 11, 2012 7:11 pm

Or poke around here for a while.

http://www.sucarb.co.uk/ProductSearch.aspx

You might find something.

fingers · Post by **fingers** » Mon Jun 11, 2012 9:13 pm

wot179 wrote:They arent 2 inch SUs,they look like 1 1/2 or 1 1/4s.

They will be off some 4 cylinder pommy shitbox,an MG or the like...

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Sorry......I jumped to the conclusion they were 2'' what size are they please mate ...............fingers

wot179 · Post by **wot179** » Mon Jun 11, 2012 10:54 pm

errrr.....did you read my post fingers?

OldMan's Lacky · Post by **OldMan's Lacky** » Tue Jun 12, 2012 10:36 am

fingers wrote: Sorry......I jumped to the conclusion they were 2'' what size are they please mate ...............fingers

They seem to be 1 and a half inches.

Was looking in the 'Technical' section of that website (under SU carbs) and it seems to have an engine flange of a HS2 carb but an intake flange of a HS6 carb

Might just search the uk ebay and see if I can find anything similar.

Cheers guys.

OldMan's Lacky · Post by **OldMan's Lacky** » Tue Jun 12, 2012 1:49 pm

Think I found them?

http://www.ebay.co.uk/itm/MINI-COOPER-S ... 35bc80753f

fbekholden.com

Twin SU Carbys

Twin SU Carbys

Re: Twin SU Carbys

Re: Twin SU Carbys

Re: Twin SU Carbys

Re: Twin SU Carbys

Re: Twin SU Carbys

Re: Twin SU Carbys

Re: Twin SU Carbys

Re: Twin SU Carbys

Re: Twin SU Carbys

Re: Twin SU Carbys