Ammo's Ute

[Errol62]

Piece a piss maaaaaate

Sent from my SM-G781B using Tapatalk

[Wrongway Roger]

Today I fitted the modified brake pedal and hooked it up to the brake cylinder.
Big hand in small tight places.
Finished off the rear window but tucking up to headliner and screwing on the metal strips.
.
Could not put it off any longer, I dragged out the wire loom I purchased from Blue Wire.
I’m doing away with the ignition key and going to a push button start with hidden transponder.
Having fun matching the wires using the 2 diagrams supplied with each kit and VL workshop manual.

21 circut loom.JPG (231.63 KiB) Viewed 935 times

Cheers,
Roger

[EK283]

Wiring is fun if you understand it.

My only suggestion is to keep your fuel pump and ignition wires as seperate looms, it makes it easier if you ever decide to upgrade those items.

Greg

[Wrongway Roger]

I need your help.
I have this alternator to use but not sure if I need to add a regulator or not into the wiring loom or if this has one already.

Alternator.JPG (205.61 KiB) Viewed 808 times

Cheers,
Roger

[Errol62]

Any numbers stamped evident rog?

Sent from my SM-G781B using Tapatalk

[Errol62]

Gee, post number 500 .
This is an external one off VC Commodore, or VH, I believe.

Sent from my SM-G781B using Tapatalk

[Brett027]

100% that alternator requires an external regulator. Usually the aluminium can type.

[Blacky]

That's not much of an alternator Roger, how much electrical wizardry will this ute have in it ? Might be better off heading down to pick a part and finding an 80a or so one ????

[ardiesse]

Sell the alternator for a small fortune to the HKTG crowd as a genuine Monaro part . . .

Rob

[Errol62]

I've been using one of these for 40 years give or take. Got a few spares if you can use one.

Sent from my SM-G781B using Tapatalk

[Brett027]

Yes- they are best regulators. But Blacky and Rob are on the money. 50amps wringing wet is not much to go on.

[Wrongway Roger]

Thanks for the replies as my electrical knowledge is limited.
Current using 3 workshop manuals VH and VL Commodore and a HQ one.
I will look for a larger alternator 80amp and yes Clay I may grab one from you.
Cheers,
Roger

[Errol62]

Sent from my SM-G781B using Tapatalk

[Wrongway Roger]

There has been progress on the wiring of the ute although sometimes it is hard to see.

under dash.JPG (96 KiB) Viewed 510 times

To ease my poor back I decided to work on the gauge cluster.

Gauge cluster.JPG (84.71 KiB) Viewed 510 times

Spent a lot of time, very carefully on the odometer to show the actual miles the ute has done since the rebuild stated.

mileage.JPG (48.1 KiB) Viewed 510 times

The black gauge background has an upgrade to match the 4 gauge I will be installing in the dash.

gauge 2.JPG (65.5 KiB) Viewed 510 times

Gauge repainted.JPG (60.89 KiB) Viewed 510 times

Small steps but it is forward.
Cheers,
Roger

[Brett027]

Very meticulous work Roger.